& updates
1962 Alfa Romeo Giulia Spider
NEW FEATUREON/OFF
Why am I an Automotive Masterpiece?
G. Team cars
1970 Scuderia Nissena (IT)
In the early 1950s Alfa Romeo was completing its transition from limited-production cars to large-scale manufacturing. The first major step had been the 1900, introduced in 1950, while the Giulietta project was intended to extend the same process into a smaller and less expensive market segment. Internally identified as the Tipo 750, the new model was originally planned around a four-door saloon, but delays in its development led Alfa Romeo to introduce the coupé first. The Giulietta Sprint was unveiled at the Turin Motor Show on 21 April 1954, followed in 1955 by the Berlina and the Pinin Farina Spider. The range subsequently expanded to include the Sprint Veloce and Spider Veloce, the Sprint Speciale, the Zagato-bodied SZ and other less common derivatives. A central feature of the Giulietta was its 1,290 cc four-cylinder engine, with light alloy block and cylinder head and twin overhead camshafts. Alfa Romeo described it as the first series-production engine of this type made entirely in aluminum. In the original Berlina it produced approximately 50-53 hp, while the Sprint initially offered 65 hp; higher-output versions followed as the range developed. Power was transmitted to the rear wheels through a four-speed gearbox. The Giulietta also introduced Alfa Romeo to production volumes on a scale previously unknown to the company. The 100,000th example was completed at Portello around the beginning of 1961, while total Giulietta production between 1954 and 1965 reached 177,690 cars in the various body styles and derivatives. More than 130,000 of these were saloons. During production, the original Tipo 750 series was progressively replaced by the revised Tipo 101 specification. The changes differed according to model and included modifications to chassis dimensions, mechanical components, body details and interiors. In the case of the Spider, the transition to Tipo 101 took place in 1959 and included an increase in wheelbase from 2,200 to 2,250 mm. In June 1962 Alfa Romeo introduced the Giulia TI saloon, powered by a 1,570-cc development of the same basic twin-cam four-cylinder engine. The change from Giulietta to Giulia did not immediately replace all the existing body styles. Instead, some Giulietta-derived models remained in production and were adapted to the new 1.6-litre mechanical specification. This resulted in models such as the Giulia Sprint and Giulia Spider, which retained the established Bertone and Pinin Farina bodies while adopting the larger engine and other mechanical developments associated with the new generation. They therefore formed a direct technical and chronological link between the Giulietta introduced in 1954 and the entirely new Giulia-derived coupés and spiders that followed during the 1960s.
The Giulietta Spider was developed shortly after the Sprint and Berlina as the open version of Alfa Romeo’s new compact range. An important role in the project was played by Max Hoffman, the influential New York importer who had already encouraged several European manufacturers to develop models specifically suited to the American market. Hoffman saw considerable potential in a small Alfa Romeo open sports car and pressed the company to add such a version to the Giulietta range. Alfa Romeo asked both Bertone and Pinin Farina to prepare proposals. Bertone’s prototypes, developed under Franco Scaglione, adopted a markedly sporting treatment, while Pinin Farina proposed a cleaner and more restrained design. Alfa Romeo selected the latter for production. The resulting two-seat Spider retained the main mechanical components of the Giulietta but used a substantially shorter chassis: the original Tipo 750 D had a wheelbase of 2,200 mm, compared with 2,380 mm for the Sprint and Berlina. The first Giulietta Spiders were completed in 1955, and the model made its public debut during that year’s European motor-show season. Series production expanded rapidly from 1956. The body was built by Pinin Farina, while the mechanical specification was centred on Alfa Romeo’s 1,290 cc all-aluminum twin-cam four-cylinder engine, driving the rear wheels through a four-speed gearbox. The standard Spider was joined in 1956 by the higher-performance Spider Veloce, distinguished mechanically by, among other features, twin Weber carburetors and a higher state of engine tune. In 1959 the Spider was revised from the original Tipo 750 D specification to Tipo 101.03. The wheelbase increased from 2,200 to 2,250 mm, while a number of mechanical, body and interior details were modified. The revised standard 1,290 cc engine produced approximately 79 hp, while the corresponding Tipo 101.07 Spider Veloce developed about 96 hp. Further detail changes followed during the final years of Giulietta Spider production. In total, approximately 14,300 standard Giulietta Spiders and 2,800 Spider Veloce were produced between 1955 and 1962. The introduction of the Giulia range in 1962 did not immediately bring an entirely new open model. Instead, Alfa Romeo retained the established Pinin Farina body and adapted it to the new 1,570 cc Giulia mechanical specification. The resulting Giulia Spider, Tipo 101.23, combined the existing 2,250 mm-wheelbase structure with the larger twin-cam engine and a five-speed gearbox. Externally it remained very close to the late Giulietta Spider, the most immediately recognisable difference being the raised section on the bonnet required to accommodate the taller 1.6-litre engine, together with revised badging. The Giulia Spider remained in production until 1965. A more powerful Giulia Spider Veloce, Tipo 101.18, followed in 1964. The model therefore represented the final development of the Pinin Farina Spider introduced in 1955, bridging the Giulietta generation and the completely new Alfa Romeo Spider introduced in 1966.
The Giulia Spider, chassis no. AR*373119*, is recorded as completed on 28 July 1962 by Alfa Romeo with Pininfarina coachwork. It was first registered in Palermo as PA-90747 in August 1962. Its first documented owner was Francesco Florio, a prominent Palermo building contractor, who acquired the car for Lire 1,810,000; he was followed by Gabriele Garajo in 1963, Alessandro Leone in 1965, Giuseppe Venezia and Salvatore Beninati in 1966, and Angela Maria Terenzio from March 1967. In July 1967 the car was re-registered as CL-28609. The most significant episode in its early history came on 3 May 1970, when the car competed in the 54th Targa Florio on the Piccolo Circuito delle Madonie. Entered by Scuderia Nissena as #162 in the Sport Group 5, 1600 cc class, it was driven by the Sicilian pairing of Antonino “Nenè” Ferraro and Giuseppe Valenza. The Giulia Spider completed all eight laps in 6 hours 38 minutes 04.2 seconds, finishing 30th overall and 3rd in class. Later recollections collected from people close to Ferraro and Valenza provide additional details on the preparation of the car for the event. According to these accounts, the Spider received a later 1600 engine, reportedly originating from a Sprint GT, prepared with raised-crown pistons, balanced standard connecting rods, revised cylinder-head ports, more aggressive camshafts and 45 mm Weber carburettors. A free-flow exhaust was fitted, while the standard gearbox was retained. The car reportedly ran on Kleber tyres, with a stripped interior and a lightweight aluminum competition seat originating from a Simca Abarth 1300. The braking system also required attention to comply with the regulations requiring a dual hydraulic circuit. The same oral sources recall an unusual background to the Targa Florio entry. Ferraro had apparently intended to compete with a Ferrari but, after this became impossible for reasons that remain unclear, the Giulia Spider was made available to him for the race. Later testimony attributes this gesture to Umberto Cortese, although the surviving ownership documentation records Angela Maria Terenzio as the registered owner at the time. Ferraro and Valenza are also remembered as having assisted other competitors whose cars had suffered mechanical problems during practice, allowing some of them to take the start after overnight repairs. Another recollection concerns an incident during the race, when the Spider reportedly left the road and damaged a wheel. Spectators are said to have helped the crew by finding a compatible replacement wheel, enabling Ferraro and Valenza to continue and complete the event. Although this episode has so far been preserved through oral testimony rather than contemporary documentation, it forms part of the surviving recollections surrounding the car’s 1970 Targa Florio participation. The Giulia Spider remained registered to Angela Maria Terenzio until 3 October 1989, when it passed to Umberto Cortese. Cortese retained it until October 2010, when it was acquired by Giorgio Cannata; in May 2019 the car entered its present private collection.